Xiaomi Fimi X8 SE 2020 Drone Firmware Updates and Downloads
Download the latest firmware updates for your Xiaomi Fimi X8 SE 2020 drone taken from here https://www.fimi.com/support/download/view?id=21
You can update the controller, drone and individual battery packs via the Fimi Navi 2020 phone app or do it manually with the below procedure.
- Download the firmware of choice
- Use a USB cable to connect the drone and your computer
- Turn the drone on
- Copy the firmware file and paste it on the FC-UPGRADE folder and wait for 3 minutes and then power the drone off and unplug the USB Cable
- Turn the remote control on and turn the drone on and wait for a 2 to 3 minutes and the drone will auto update the firmware
- Check the system firmware in the app, it should read the number of the firmware update you want
Xiaomi Fimi X8 SE Firmware Drone Camera Firmware V2017B :
- Fix some bugs
Xiaomi Fimi X8 SE Drone FC Firmware V1013E :
- Optimize landing when in low battery
Xiaomi Fimi X8 SE 2020 Camera Firmware V2018A :
- Optimize camera image quality
- Add image metering function
- Add video shutter function
Xiaomi Fimi X8 SE 2020 Camera Firmware V2019B :
- Optimize the image
- Fix some bugs
- Add zoom function
Xiaomi Fimi X8 SE 2020 FC Firmware V1015E :
- Optimize gimbal stabilization
- Optimize flight parameter when shooting panorama
Xiaomi Fimi X8 SE 2020 Camera Firmware V2020D :
- Fix some bugs
Xiaomi Fimi X8 SE 2020 Camera Firmware V2021B :
- Optimize 2.7K and 1080P image quality
- Optimize coding performance at high bit rates
Xiaomi Fimi X8 SE 2020 Firmware V1019A :
- 1.Optimize possible downwards gimbal vibration
- 2.Fixed some known bugs
Xiaomi Fimi X8 SE 2020 Camera Firmware V2023B :
- 1.Optimize image white balance
- 2.Fixed some known bugs
Xiaomi Fimi X8 SE 2020 Camera Firmware V2024C :
- Optimize image white balance
- Add GPS information to photos
- Fix some known bugs
Xiaomi Fimi X8 SE 2020 FC Firmware V1022B :
- Adjust maximum flight height near NFZ as 120m
- Fixed some known bugs
Xiaomi Fimi X8 SE 2020 Camera Firmware V2025A :
- Optimize purple-tint of DNG
Fimi X8 SE 2020 FC Firmware V1024D :
1.Optimize intelligent follow effect
2.Fixed some known bugs
Fimi X8 SE 2020 Camera Firmware V2028A :
1.Support 12M photo size
2.Fixed some known bugs
Fimi X8 SE 2020 Vison Firmware V2003A :
1.Optimize smart tracking
Fimi X8 SE 2020 Relay Firmware V2009B
1.Optimize smart tracking
Comments
Hi, did you format the SD…
Hi, did you format the SD card in the drone before you did this update and put the sd card in your laptop?
I need to know if anyone…
I need to know if anyone could tell me how to pinpoint an actual vibration issue. My drone starts fine, with no warnings but when I get about 15ft in the air I get a legitimate vibration issue (not false reading) and I have very little control of the drone.
To downgrade from 2029B…
To downgrade from 2029B would b 2028A which is here and I believe it would put back the 12M picture support plus whatever know bugs that there were..
Hello gentlemen! Does anyone…
Hello gentlemen! Does anyone have all versions, even the old ones please?
Hi Jason, these are all…
Hi Jason, these are all firmware updates Fimi have released for the X8 SE 2020 on their website support section.
As a certified pilot and…
As a certified pilot and having owned and used a number of drones from DJI and Parrot, I found this possessed many of the similar traits. There's a large number of intelligent flights modes for any user from beginner to advanced and each are simple to setup. The folding design also makes this perfect for travel or just throwing in a back when you're heading somewhere.
The last update has knocked…
The last update has knocked my compass off so I cannot fly as it won't connect to GPS.
How do I fix this? Is there another update coming? Should I undo the update?
Please advise because I really need to get drone videos before New Years.
Thank you
Are you updating using the…
Are you updating using the app on a phone, or manually?
You can use any of the firmware updates above to roll back and fix your Fimi X8 SE 2020 drone.
I am using a computer to a…
I am using a computer to a memory card then using the memory card at boot up to download.
Maybe try through the app…
Maybe try through the app and see how that works?
If it doesn't, roll back to a previous firmware update.
It really doesn't matter…
It really doesn't matter which method. I just want to fly again. Can u give me a play by play instruction so I can get up there? I've sent my drone code and password to Fimi alewady...
Appears this page has not…
Appears this page has not been updated for awhile. Was looking to downgrade my camera firmware from 2029B.
Wasn't there some other versions of the camera firmware from 2025A to 2029B ?
Thanks
We have updated this page…
We have updated this page with each and every update Fimi has put on their site.
Some others have had firmware sent to them individually which were not published on Fimi's site.
Are you looking for any of these?
Add new comment
Articles Mentioning This Drone
In this article we compare the specs and features of the Fimi X8 Mini and the Fimi X8 SE 2020 camera drones.
In this article we compare the specs and features of the Fimi X8 Mini and the Fimi X8 SE 2020 camera drones.
Are you new to flying your Fimi X8 SE 2020 camera drone and found that no matter what you try, your drone disconnects mid flight and automatically returns to home?
In this article we compare the specs and features of the DJI Mini 2 and the Fimi X8 SE 2020 camera drones.
In this article we compare the specs and features of the Xiaomi Fimi X8 SE 2020 and the Yuneec Mantis Q camera drones.
In this article we compare the specs and features of the Xiaomi Fimi X8 SE 2020 and the Xiaomi Fimi A3 camera drones.
Hi, I can ´t update with this method. My Laptop says, there's not enough space on fc_upgrade.
and that's true, there are one round about 3mb.
i want to downgrade my drone, because I get no live video. there's also no firmware for my camera and vision. the app says n/a for both, the other like rc or gimbal got firmware.
also my sd card is not. detected I think